I own a Lenovo X200. The wifi won't connect to my home network but connects will connect with all the other networks (at work, the library, coffee shops). When I try trouble shooting, it claims that the issue is caused by "the driver is disconnected." All the driver software is up-to-date as well. Is there a way I can resolve the issue so I connect to my home wifi?
---------------Error Message----------------
Connection status: Not connected
Cause: The driver disconnected.
Error code: 229387
Recommended actions:
Verify that the encryption settings (WEP/TKIP/AES) specified in this profile match those expected by the wireless network.
Verify that the wireless adapter in your computer has not been restricted from accessing the radio channels being used by the wireless network.
If the problem persists, contact your network administrator and provide the troubleshooting information below.
Adapter Details
***************
Adapter name Intel(R) WiFi Link 5100 AGN
Adapter type Wireless LAN
Adapter speed 54 Mbps
Driver/Firmware version 14.2.0.10/ N/A
Adapter status Enabled
Connection Status Not connected
Disable unused cards? Yes
TCP/IP Settings
***************
DHCP enabled? Yes
Append parent suffixes of the primary DNS suffix? Yes
Register connection's DNS suffix in registration? Yes
Register connection's DNS suffix in DNS registration? Yes
Enable LMHOSTS Lookup? No
NetBIOS setting "Default"
Wireless Settings
*****************
Network name (SSID) **********
Connection type Access point
Wireless mode Auto
Security encryption WPA-PSK/AES
System Information
******************
System model 7459X18
BIOS version 6DET71WW (3.21 )
Operating system version Windows 7, Service pack 1
Access connections version 6.23
Access Point scan list
**********************
Network name (SSID) Wireless mode MAC address Signal strength Channel
-----------------------------------------------------------------------------------------------------
********** 802.11n 00:24:A5:11:44:B7 99% 5
xfinitywifi 802.11n CE:03:FA:63:5A:A6 28% 1
xfinitywifi 802.11n 5A:23:8C:B8:45:01 45% 1
xfinitywifi 802.11n C6:27:95:CE:50:5F 23% 1
Bugbee 802.11n 58:23:8C:B8:45:0F 43% 1
*****'s Wi-Fi Network 802.11n 88:1F:A1:35:D5:AA 45% 11
*****'s Wi-Fi Network 802.11n 00:1F:F3:03:B2:6F 31% 11
DKLM WORLD 802.11g 5C:D9:98:2C:83:A2 30% 11
Global Settings
***************
Network
-------
Allow Windows users without administrator privileges to create and apply location profiles ->No
Allow the wireless LAN radio to be turned off when inactive -> Yes
Enable auto deletion of unused profiles -> No
Disable the Peer to Peer community feature -> Yes
Disable Mobile Hotspot -> No
Allow selection of location profiles on the on-screen-display wireless menu -> No
Notifications
-------------
Show ThinkVantage Access Connections status icon in task tray -> No
Show wireless status icon in task tray -> No
Display the progress indicator window when a profile is being applied -> Yes
Show Access connections Gauge in task bar -> Yes
Preferences
-----------
Enable sound effects -> No
Enable animations -> Yes
Do not show balloon tips from the Access Connections system tray icon -> Yes
Do not show balloon tips from the Access connections Gauge -> Yes
Automatic location profile switching list
*****************************************
Include Ethernet connections in automatic switching and prompt me to save Ethernet ports -> Yes
Preferred Location Of WLAN -> No
When no other connections are available, connect through Wireless WAN or WiMAX -> No
Wireless priority list
----------------------
Selection Priority Location profile name Connection order Connection details
------------------------------------------------------------------------------------------------------------------------------------------------------------
Yes 1 406 Ethernet 1 saved port(s)
Yes 2
Yes 3 ethernet connection Ethernet 1 saved port(s)
Yes 4
Log File
********
Debug Log is disabled
---------------Error Message----------------
Connection status: Not connected
Cause: The driver disconnected.
Error code: 229387
Recommended actions:
Verify that the encryption settings (WEP/TKIP/AES) specified in this profile match those expected by the wireless network.
Verify that the wireless adapter in your computer has not been restricted from accessing the radio channels being used by the wireless network.
If the problem persists, contact your network administrator and provide the troubleshooting information below.
Adapter Details
***************
Adapter name Intel(R) WiFi Link 5100 AGN
Adapter type Wireless LAN
Adapter speed 54 Mbps
Driver/Firmware version 14.2.0.10/ N/A
Adapter status Enabled
Connection Status Not connected
Disable unused cards? Yes
TCP/IP Settings
***************
DHCP enabled? Yes
Append parent suffixes of the primary DNS suffix? Yes
Register connection's DNS suffix in registration? Yes
Register connection's DNS suffix in DNS registration? Yes
Enable LMHOSTS Lookup? No
NetBIOS setting "Default"
Wireless Settings
*****************
Network name (SSID) **********
Connection type Access point
Wireless mode Auto
Security encryption WPA-PSK/AES
System Information
******************
System model 7459X18
BIOS version 6DET71WW (3.21 )
Operating system version Windows 7, Service pack 1
Access connections version 6.23
Access Point scan list
**********************
Network name (SSID) Wireless mode MAC address Signal strength Channel
-----------------------------------------------------------------------------------------------------
********** 802.11n 00:24:A5:11:44:B7 99% 5
xfinitywifi 802.11n CE:03:FA:63:5A:A6 28% 1
xfinitywifi 802.11n 5A:23:8C:B8:45:01 45% 1
xfinitywifi 802.11n C6:27:95:CE:50:5F 23% 1
Bugbee 802.11n 58:23:8C:B8:45:0F 43% 1
*****'s Wi-Fi Network 802.11n 88:1F:A1:35:D5:AA 45% 11
*****'s Wi-Fi Network 802.11n 00:1F:F3:03:B2:6F 31% 11
DKLM WORLD 802.11g 5C:D9:98:2C:83:A2 30% 11
Global Settings
***************
Network
-------
Allow Windows users without administrator privileges to create and apply location profiles ->No
Allow the wireless LAN radio to be turned off when inactive -> Yes
Enable auto deletion of unused profiles -> No
Disable the Peer to Peer community feature -> Yes
Disable Mobile Hotspot -> No
Allow selection of location profiles on the on-screen-display wireless menu -> No
Notifications
-------------
Show ThinkVantage Access Connections status icon in task tray -> No
Show wireless status icon in task tray -> No
Display the progress indicator window when a profile is being applied -> Yes
Show Access connections Gauge in task bar -> Yes
Preferences
-----------
Enable sound effects -> No
Enable animations -> Yes
Do not show balloon tips from the Access Connections system tray icon -> Yes
Do not show balloon tips from the Access connections Gauge -> Yes
Automatic location profile switching list
*****************************************
Include Ethernet connections in automatic switching and prompt me to save Ethernet ports -> Yes
Preferred Location Of WLAN -> No
When no other connections are available, connect through Wireless WAN or WiMAX -> No
Wireless priority list
----------------------
Selection Priority Location profile name Connection order Connection details
------------------------------------------------------------------------------------------------------------------------------------------------------------
Yes 1 406 Ethernet 1 saved port(s)
Yes 2
Yes 3 ethernet connection Ethernet 1 saved port(s)
Yes 4
Log File
********
Debug Log is disabled