GeekPolice Tech TutorialsLog in

 

Windows 10 0xc000000e Bootup error

Share

descriptionSolvedRe: Windows 10 0xc000000e Bootup error

more_horiz
Okay thank you follow the instructions at the tutorial.

descriptionSolvedRe: Windows 10 0xc000000e Bootup error

more_horiz
I followed the instructions worked fine until step 15 then it didn't recognise the info and the following 16 didn't work, 17 did so I would guess I would need to do this again if so?

descriptionSolvedRe: Windows 10 0xc000000e Bootup error

more_horiz
Can you check and see if System volume have been assigned a drive letter if not assign a drive letter to System volume and follow the instructions starting from step 15.

Type diskpart and press Enter.

Type list volume and press Enter.

Under the label row, find the label System Reserved and note its corresponding Volume number.

Select Volume=N and press Enter, where N is the Volume number you noted earlier.

Now type assign letter=w and press Enter.

Type exit and press Enter.

Follow the instructions starting from step 15.

descriptionSolvedRe: Windows 10 0xc000000e Bootup error

more_horiz
When you assign a drive letter (W) or any other drive letter use this drive letter starting from step 15.

descriptionSolvedRe: Windows 10 0xc000000e Bootup error

more_horiz
Okay back to step 15 so instead of C:\ should I be in W? Or instead of attrib C:\ it should be W:\ ?

descriptionSolvedRe: Windows 10 0xc000000e Bootup error

more_horiz
If you have assigned a drive letter W you will use this drive letter so instead of C:\ you will replace it with W:\ same goes for the Ren command.

descriptionSolvedRe: Windows 10 0xc000000e Bootup error

more_horiz
How is everything progressing, do you need more assistant on this issue?

descriptionSolvedRe: Windows 10 0xc000000e Bootup error

more_horiz
sorry had to eat, i am trying to understand how to do these next steps, so in command prompt result1/2 do i still do C; or go to W:?

descriptionSolvedRe: Windows 10 0xc000000e Bootup error

more_horiz
If you have assigned a drive letter W to the System volume then you will execute below commands one at a time.

Code:

attrib w:\boot\bcd -h -r -s

ren w:\boot\bcd   bcd.old

bootrec /rebuildbcd

descriptionSolvedRe: Windows 10 0xc000000e Bootup error

more_horiz
it says when typing in attrib etc that the path is not found W:\boot

descriptionSolvedRe: Windows 10 0xc000000e Bootup error

more_horiz
If you can please post a screenshot of below commands outputs.

Code:

Diskpart

List disk

List volume

Exit

descriptionSolvedRe: Windows 10 0xc000000e Bootup error

more_horiz
https://i.servimg.com/u/f62/19/88/98/09/img_2011.jpg

descriptionSolvedRe: Windows 10 0xc000000e Bootup error

more_horiz
You have not assigned a drive letter W to the System volume that is the reason commands are not working.

I have also notice System volume now labeled as Hidden this should be no problem but if nothing works we may have to recreate this partition (volume).

Please execute below commands one at a time and post a screenshot of the commands outputs.

Code:

diskpart

list volume

select volume=3

assign letter=w

list volume

descriptionSolvedRe: Windows 10 0xc000000e Bootup error

more_horiz

https://i.servimg.com/u/f62/19/88/98/09/15230410.jpg

descriptionSolvedRe: Windows 10 0xc000000e Bootup error

more_horiz
Please execute below commands one at time.

Code:

attrib w:\boot\bcd -h -r -s

ren w:\boot\bcd  bcd.old

bootrec /rebuildbcd
Permissions in this forum:
You cannot reply to topics in this forum