WiredWX Hobby Weather ToolsLog in

 


descriptionDo we do printers here?  EmptyDo we do printers here?

more_horiz
Pls don't trash if there is no printer help here I've used this site in the past and it was excellent so I wanted to try. The MP160 multifunction is otherwise fine, but it grabs the paper, but then it doesn't continue to feed it thru. It proceeds to print the entire job as if the paper is being fed. I looked into it from both sides and the main roller works initially, and the smaller rollers on the output side are moving but still nothing. I've stuck an envelope thru to check for obstructions, PC dusted and I still have the problem. Help would be greatly appreciated.....

descriptionDo we do printers here?  EmptyRe: Do we do printers here?

more_horiz
The only thing I can suggest is that some times the rubber rollers get a glaze on them. Once that happens, they can't grab the paper. If you think that's happening, try a little rubber renew solution and something abrasive like Scotchbrite.

descriptionDo we do printers here?  EmptyRe: Do we do printers here?

more_horiz
Thanx for the advice but the roller stops after the initial grab. I really may have to bring it in for repair but thats a waste cuz I'm quite sure they're gonna try and gouge but we'll see. Thanx again

descriptionDo we do printers here?  EmptyRe: Do we do printers here?

more_horiz
privacy_tip Permissions in this forum:
You cannot reply to topics in this forum